What Is the Process for Parking Lot Striping in Dallas?

Freshly painted markings and lines boost your parking lot’s aesthetics and safety, and they also help ensure your compliance with applicable laws. Parking lot striping in Dallas can be complex, but the process can be simplified by breaking it down into four categories: planning, preparing, plotting, and painting.

What Is Involved With Planning for Parking Lot Striping in Dallas?

The planning stage will involve both you and your local parking lot striping contractor. It is always best if a parking lot striping company can complete a job all at once, but this is not always possible. For example, some clients have valid reasons for requiring that at least part of their parking lots remain open at all times. Other clients want to have their Dallas parking lot striping contractor sealcoat their pavements before applying the paint. Furthermore, you will probably need to determine a suitable site to provide alternative parking while your contractor is performing your parking lot striping. You will need to communicate the location of the alternative parking as well as the date and time of the work to your employees, clients, tenants, or residents. You will also need to make sure that there are no vehicles parked in your lot when your contractor arrives to begin painting your stripes and markings. Your pavement must be dry before your contractor begins, so you should arrange to turn off your sprinkler system at least 24 hours before your work is scheduled to begin. Your local parking lot striping contractor can help you write your notifications, including any signage that you need to display.

What Is Involved With Preparing for Dallas Parking Lot Striping?

Whether you want your parking lot striping company to sealcoat your pavement or just paint your lines and markings, your pavement needs to be prepared.

1. Obviously, you need to remove piles of debris, and you should relocate portable signboards or other objects.
2. Tree sap, automotive fluids, and embedded dirt can prevent your pavement from bonding with the paint and sealcoat.
3. Your Dallas parking lot striping contractor will need to clean your pavement to remove all contaminants.
4. If your parking lot has been previously striped, you might want to consider having your contractor remove any existing paint to avoid what contractors refer to as ghost lines.
5. Significant cracks or other pavement damage will need to be repaired before striping and marking your lot.

What Does Plotting Mean in Relation to Parking Lot Striping in Dallas?

There are numerous ways that parking lot striping companies can configure your lot. For example, the parking angle can affect the maximum number of spaces you can offer. You can have travel aisles that accommodate one-way or two-way traffic. There is also the issue of ensuring that your parking lot striping and marking complies with the regulations contained in the Americans with Disabilities Act. In addition, your parking lot may be subject to local codes that cover various topics, including fire lanes and reserved spaces for emergency response vehicles. After identifying all of the factors, your local parking lot striping contractor will draw up a design that consolidates the elements to create a comprehensive layout.

What Is Involved in the Painting of Parking Lot Striping in Dallas?

Contractors can use a number of different machines for lot striping in Dallas, and some of the machines are more high-tech than others. The type of machine can sometimes eliminate or add steps to the actual painting process. However, the normal steps are shown on the following list.

1. Set up traffic control devices to prevent pedestrians and vehicles from entering the work area.
2. Measure each parking space, then snap a chalk line along the edges.
3. Maneuver the striping machine to the end of the first line, then apply the paint.
4. Repeat the first two steps until the lines have been striped for every space.
5. Place the stencils for the pavement markings identified in the layout, including traffic arrows, handicapped parking symbols, and crosswalks. These markings are usually applied by using a hand roller.
6. Some pavements may be so porous that they absorb an excessive amount of paint. Thus, a second coat of paint may be required.
7. After painting all lines and markings, the contractor will keep the area closed until the paint dries sufficiently. Dallas parking lot striping paint typically takes less than an hour to dry, but the type of paint and the weather can impact drying time.

To learn more about parking lot striping in Dallas, contact Advanced Texas Striping. We are a respected, experienced, veteran-owned and -operated company with an exemplary reputation for integrity, craftsmanship, and service. We offer parking lot striping, parking lot re-striping, warehouse striping, parking lot layout, and ADA compliance markings. We offer our services to clients throughout the DFW metroplex. To request a free quote, you can fill out our online form, call 817-600-5975, or email Mark@ATStriping.net.